Aluminium Alloys Ingot
Whenever we drive a car or fill fuel, we come across one of the forms of aluminium alloys. Aluminium alloy ingots are common in transport and automotive applications such as in making castings for wheels, gas pump nozzles, chassis components and truck hubs where safety matters the most.
Grades: We manufacture all grades of aluminium alloy ingots like ADC-12, ADC-6, A-413, A-360, ALSI7MG, AC4C, AC4B, ALSI10MG, T-1088, LM-6, JED029M1-M2, LM-9, LM-25, ALSI-132, LM-24, etc.
Industrial Standards: We follow the Japanese Industrial Standard (JIS) for the alloy’s compositions and we also cater to the customer's composition requirements.
We follow the Japanese Industrial Standard (JIS) for the alloy’s compositions:
Unit |
Chemical composition (mass %) |
|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Cu |
Si |
Mg |
Zn |
Fe |
Mn |
Cr |
Ni |
Sn |
Pb |
Ti |
Al |
|
ADC1 |
1.0 max. |
11.0 to 13.0 |
0.3 max. |
0.5 max. |
1.3 max. |
0.3 max. |
— |
0.5 max. |
0.1 max. |
0.20 max. |
0.30 max. |
Remainder |
ADC3 |
0.6 max. |
9.0 to 11.0 |
0.4 to 0.6 |
0.5 max. |
1.3 max. |
0.3 max. |
— |
0.5 max. |
0.1 max. |
0.15 max. |
0.30 max. |
Remainder |
ADC5 |
0.2 max. |
0.3 max. |
4.0 to 8.5 |
0.1 max. |
1.8 max. |
0.3 max. |
— |
0.1 max. |
0.1 max. |
0.10 max. |
0.20 max. |
Remainder |
ADC6 |
0.1 max. |
1.0 max. |
2.5 to 4.0 |
0.4 max. |
0.8 max. |
0.4 to 0.6 |
— |
0.1 max. |
0.1 max. |
0.10 max. |
0.20 max. |
Remainder |
ADC10 |
2.0 to 4.0 |
7.5 to 9.5 |
0.3 max. |
1.0 max. |
1.3 max. |
0.5 max. |
— |
0.5 max. |
0.2 max. |
0.2 max. |
0.30 max. |
Remainder |
ADC10Z |
2.0 to 4.0 |
7.5 to 9.5 |
0.3 max. |
3.0 max. |
1.3 max. |
0.5 max. |
— |
0.5 max. |
0.2 max. |
0.2 max. |
0.30 max. |
Remainder |
ADC12 |
1.5 to 3.5 |
9.6 to 12.0 |
0.3 max. |
1.0 max. |
1.3 max. |
0.5 max. |
— |
0.5 max. |
0.2 max. |
0.2 max. |
0.30 max. |
Remainder |
ADC12Z |
1.5 to 3.5 |
9.6 to 12.0 |
0.3 max. |
3.0 max. |
1.3 max. |
0.5 max. |
— |
0.5 max. |
0.2 max. |
0.2 max. |
0.30 max. |
Remainder |
ADC14 |
4.0 to 5.0 |
16.0 to 18.0 |
0.45 to 0.65 |
1.5 max. |
1.3 max. |
0.5 max. |
— |
0.3 max. |
0.3 max. |
0.2 max. |
0.30 max. |
Remainder |
Al Si9(1) |
0.10 max. |
8.0 to 11.0 |
0.10 max. |
0.15 max. |
0.65 max. |
0.50 max. |
— |
0.05 max. |
0.05 max. |
0.05 max. |
0.15 max. |
Remainder |
Al Si12(Fe)(2) |
0.10 max. |
10.5 to 13.5 |
0.10 max. |
0.15 max. |
1.0 max. |
0.55 max. |
— |
— |
— |
— |
0.15 max. |
Remainder |
Al Si10Mg(Fe)(1) |
0.10 max. |
9.0 to 11.0 |
0.20 to 0.50 |
0.15 max. |
1.0 max. |
0.55 max. |
— |
0.15 max. |
0.05 max. |
0.15 max. |
0.20 max. |
Remainder |
Al Si8Cu3(2) |
2.0 to 3.5 |
7.5 to 9.5 |
0.05 to 0.55 |
1.2 max. |
0.8 max. |
0.15 to 0.65 |
— |
0.35 max. |
0.15 max. |
0.25 max. |
0.25 max. |
Remainder |
Al Si9Cu3(Fe)(2) |
2.0 to 4.0 |
8.0 to 11.0 |
0.05 to 0.55 |
1.2 max. |
1.3 max. |
0.55 max. |
0.15 max. |
0.55 max. |
0.25 max. |
0.35 max. |
0.25 max. |
Remainder |
Al Si9Cu3(Fe)(Zn)(2) |
2.0 to 4.0 |
8.0 to 11.0 |
0.05 to 0.55 |
3.0 max. |
1.3 max. |
0.55 max. |
0.15 max. |
0.55 max. |
0.25 max. |
0.35 max. |
0.25 max. |
Remainder |
Al Si11Cu2(Fe)(2) |
1.5 to 2.5 |
10.0 to 12.0 |
0.30 max. |
1.7 max. |
1.1 max. |
0.55 max. |
0.15 max. |
0.45 max. |
0.25 max. |
0.25 max. |
0.25 max. |
Remainder |
Al Si11Cu3(Fe) |
1.5 to 3.5 |
9.6 to 12.0 |
0.35 max. |
1.7 max. |
1.3 max. |
0.60 max. |
— |
0.45 max. |
0.25 max. |
0.25 max. |
0.25 max. |
Remainder |
Al Si12Cu1(Fe)(2) |
0.7 to 1.2 |
10.5 to 13.5 |
0.35 max. |
0.55 max. |
1.3 max. |
0.55 max. |
0.10 max. |
0.30 max. |
0.10 max. |
0.20 max. |
0.20 max. |
Remainder |
Al Si17Cu4Mg |
4.0 to 5.0 |
16.0 to 18.0 |
0.45 to 0.65 |
1.5 max. |
1.3 max. |
0.50 max. |
— |
0.3 max. |
0.3 max. |
— |
— |
Remainder |
Al Mg9(1) |
0.10 max. |
2.5 max. |
8.0 to 10.5 |
0.25 max. |
1.0 max. |
0.55 max. |
— |
0.10 max. |
0.10 max. |
0.10 max. |
0.20 max. |
Remainder |